Contrex CX-1102 Manual do Utilizador descarregar pdf (Página 16)

Page 14

Load

(J6 pins 5, 3)

When the Load input (J6, pin 5) is momentarily shorted

to common, the CX-1102 enters the Load state. As a

momentary input, Load is internally latched and does

not need to be maintained closed by an operator

device.

NOTE: Close the H-Stop, Unload and F-Stop inputs

prior to entering the Load state. If you are only

using one of the Stop inputs, wire short the

other Stop inputs to the common or the

CX-1102 will not enter load.

Run

(J6 pins 6, 8)

When the Run input (J6, pin 6) is momentarily shorted

to common, the CX-1102 enters the Run state. As a

momentary input, Run is internally latched and does

not need to be maintained closed by an operator

device.

NOTE: Close the H-Stop, Unload and F-Stop inputs

prior to entering the Run state. If you are only

using one of the Stop inputs, wire short the

other Stop inputs to the common or the CX-

1102 will not enter run.

Spare

(J6 pins 7, 8)

The Spare input is not defined at this time.

Figure 12 Load

LOAD

Com

oad

Figure 13 Run

RUN

Run

Figure 14 Spare

SPAR

pare

Com

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 41 42

Sem comentários

Contrex CX-1102 Manual do Utilizador Página 16