Contrex MLP-Drive Manual do Utilizador descarregar pdf (Página 182)

C - 16

CP-79 SETPOINT LOCKOUT MASK

Setpoint Lockout Mask determines which setpoints are disabled when the keypad is locked out.

If CP-79 is set to "0", then none of the setpoints (CP-01 through CP-04) are disabled. If CP-79 is

set to "1", then all four of the setpoints are disabled. If CP-79 is set to "2", then CP-02 and CP-04

are disabled while CP-01 and CP-03 remain enabled.

CP-80 RMS CURRENT LIMIT

RMS Current Limit (CP-80) determines the level at which the MLP-Drive will limit the motor

armature’s RMS current. The MLP-Drive achieves this limit by reducing the phase angle firing.

For additional information about current limit, refer to

Installation/Setup: Calibration

CP-81 PEAK CURRENT LIMIT

Peak Current Limit (CP-81) determines the level at which the MLP-Drive will limit the motor

armature’s RMS peak current. The MLP-Drive achieves this limit by reducing the phase angle

firing. For additional information about current limit, refer to

Installation/Setup: Calibration

MP-82 MOTOR CURRENT

Motor Current (MP-82) displays the value, in amps, of the motor armature’s RMS current.

MP-83 LIMIT STATUS

Limit Status (MP-83) displays the status of the Current Limit, the Minimum Limit (CP-08) and the

Maximim Limit (CP-09) functions. A "1" in the display digit location for the respective function

indicates that function is limiting.

1 2 ... 177 178 179 180 181 182 183 184 185 186 187 ... 213 214

Sem comentários

Contrex MLP-Drive Manual do Utilizador Página 182