Contrex M-Traverse Manual do Utilizador descarregar pdf (Página 112)

3 - 65

CP-72 CHARACTER FORMAT

The M–Traverse uses three different character formats. Enter the number for the

required format, as listed below.

1 = 8 Data Bits, No Parity, One Stop Bit

2 = 7 Data Bits, Even Parity, One Stop Bit

3 = 8 Data Bits, No Parity, Two Stop Bits

CP-73 CONTROL MASK

The Serial Communications can control some of the dicrete input functions. Enter the

number for the required functions, as listed below.

0 = F–Stop only

1 = F–Stop, Run, Home Return, Home Seek, Home Set

2 = F–Stop, Batch Reset, Setpoint Select 1-4

3 = All of the Above

MV-74 COMMUNICATIONS ERROR

Serial Communications Error identifies errors in the last transmitted message that was

sent to the M–Traverse by the host computer. The digit that displays a number “1”

indicates the error. In the example below, “Invalid Parameter Code” is the error.

Transmit Error (parity, framing, overrun, no ETX, no STX)

Parameter Error (invalid parameter code or message type)

Data Error (invalid data)

Min-Max Error (out of range)

Control Mask Error or Lockout during Run State

Not Used

1 2 ... 107 108 109 110 111 112 113 114 115 116 117 ... 201 202

Sem comentários

Contrex M-Traverse Manual do Utilizador Página 112